FUSION 360 ADD INS HOW TO
FUSION 360 ADD INS SOFTWARE
FUSION 360 ADD INS SERIES
FUSION 360 ADD INS DOWNLOAD

JQuery timepicker addon is Copyright (c) 2013 Trent Richardson JQuery is Copyright 2013 jQuery Foundation and other contributors ImagesLoaded is Copyright © 2013 David DeSandro Portions copyright (c) Engine Yard and Andre Arkoīootstrap-select.js is Copyright (C) 2013 bootstrap-selectīackbone.js is Copyright (c) 2010-2013 Jeremy Ashkenas, DocumentCloudĪpple-Style Flip Counter is Copyright (c) 2010 Chris Nanney Ruby gems is Copyright (c) Chad Fowler, Rich Kilmer, Jim Weirich and others.

FUSION 360 ADD INS SOFTWARE

Third-Party Software Credits and Attributions For information about these components, click here: Īutodesk, the Autodesk logo, and Fusion 360 are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates.Īll other brand names, product names or trademarks belong to their respective holders. This Service may incorporate or use background Autodesk technology components. All rights reserved.Īll use of this Service is subject to the terms and conditions of the applicable Autodesk terms of service accepted upon access of this Service.

FUSION 360 ADD INS DOWNLOAD

You can download the insert set on the page with the free downloads.© 2014 Autodesk, Inc. I also added two OpenSCAD script you can use to create inserts and even customised drill inserts. You can use them with other tools to modify them to your needs. I added STL files for the raw insert block generated by the template to the package. If you adjust the “drill_count”, you also have to edit the last cut operation with the additional profiles. The sketch will be updated with the new parameters. Just open the sketch “example – edit this!” and adjust the parameters “drill_count” and “drill_diameter”. This parametric design will generate inserts for various drill sizes. To demonstrate the template, I also added a drill insert example design. Use a minimum of 2mm, otherwise, the insert is not connected or will break easily. This parameter controls how much material is added to the fill height. You can use this parameter in your sketch. This is the recommended lowest distance between the bottom of the insert to your removals. If you have a box 1×2, this parameter should be 1.ĭo not change this parameter. The size of the box in units in the Y-direction. If you have a box 1×2, this parameter should be 2. The size of the box in units in the X-direction. There are three parameters for you to use or change:

It contains the parametric design for a simple raw spacer block. This template generates inserts for the flat box series.

I prepared a parametric Fusion 360 design you can download for free.

FUSION 360 ADD INS HOW TO

I went with the last solution and thought how to provide the best implementation for you. The insert can be replaced at a later time, keeping the box.Ĭons: You lose some volume in each box. Pros: Existing boxes can be used, therefore compatible with the existing system. Pros: Boxes are compatible with the existing system.Ĭons: The print time increases and you lose volume in the box.

Add material to the bottom to make it straight.

Pros: Minimal change in print time and material use and you gain additional volume.Ĭons: These boxes were not compatible with the existing ones and are limited how you can stack them.

FUSION 360 ADD INS SERIES

Create a new box series without a groove at the bottom.

I could solve this problems in three ways:

The reason for this was to have a straight surface to store objects and tools in the box. One request I got many times was storage boxes with a flat bottom. Thank you very much for all the great ideas and suggestions! 😄 I got various requests and great ideas from you about how to improve the storage boxes system.

Fusion 360 add ins